Profile

The Myers WG20/WGX20 Series are rugged 2 horsepower submersible centrifugal grinder pumps designed for residential, light commercial or industrial applications. It is especially suited for use in pressure sewer applications or in systems with long discharge runs or high static heads. The WG20 Series features a patented cutter mechanism and recessed impeller design to efficiently grind typical domestic sewage solids into a fine slurry.

KEY FEATURES

• Pressure to 105 feet of head and flows of 70 GPM. Standard or high flow designs.
• Recessed impeller provides steep non-overloading operating curve.
• Oil-filled motor for max. heat dissipation and constant bearing lubrication.
• Recessed impeller reduces radial bearing loads, increases bearing life.
• High torque capacitor starts single phase motor for assured starting under heavy load.
• Seal moisture sensor warns of leak condition, prevents costly motor damage.

The Myers WG50/WG50X are rugged 5 horsepower submersible centrifugal grinder pumps designed for residential, light commercial, industrial or municipal applications. They are especially designed for grinder pump applications requiring higher flows at low to moderate heads. The WG50 features a heavy-duty cutter mechanism and recessed impeller design to efficiently grind typical sewage into a fine slurry.

KEY FEATURES

• Capacities To 185 gpm (693 lpm)
• Pressure To 92 ft. of head (28.1 m)
• Liquids Handling

-- domestic raw sewage

• Intermittent Liquid Temp. up to 140ºF (up to 60ºC)
• Winding Insulation Temp. (Class F) 311ºF (155ºC)
• Motor Electrical Data (Single phase motors are capacitor start type. Myers control panels or capacitor kits are recommended for proper operation and warranty.)

-- 3450 RPM: 3–5 HP, 1 ph, 230 volt 3 ph, 200/230/460 volt 60 Hz

The Myers high head 15 HP submersible centrifugal grinder pumps are designed for municipal, commercial or industrial applications. These pumps are especially suited for use in pressure sewer applications or in systems with long discharge runs or high static heads. The pumps feature a heavy-duty cutter mechanism and recessed impeller designed to efficiently grind typical sewage solids into a fine slurry.

KEY FEATURES

• Capacities To 150 gpm (568 lpm)
• Pressure To 257 ft. of head (78 m)
• Liquids Handling-- Domestic raw sewage
• Intermittent Liquid Temp. up to 140°F (up to 60°C)
• Winding Insulation Temp. (Class H) 356°F (180°C)
• Motor Electrical Data-- 3450 RPM: 7½, 10 and 15 HP 200/230/460/575 volts 3 phase, 60 Hz
• Std. Third Party Approvals CSA
• Optional Approvals FM Class 1, Groups C & D (WGX750HH only)

The heavy-duty Myers 3MW series sewage pumps are designed for use in residential raw sewage and light commercial applications. 3MW pumps are available in single and double seal configuration. The enclosed two-vane impeller provides high efficiency pumping and easily handles trashy solids normally found in sewage applications. This series is offered with vertical discharge and easily adapts to a quick-disconnect slide rail system.

KEY FEATURES

• Capacities To 330 gpm (20.82 lps)
• Heads To 92 ft. (28.0 m)
• Solids Handling-- 1750 2½ in. (63.5 mm)-- 3450 2 in. (50.6 mm)
• Liquids Handling-- Raw sewage, effluent, rain water
• Intermittent Liquid Temp. up to 140°F (up to 60°C)
• Winding Insulation Temp. (Class B) 260°F (130°C)

Myers 3V and 3VX (explosion-proof) submersible wastewater pumps pass a full 2 1/2" spherical solid and are the ideal choice whe selecting a pump for your next application. Myers rounded port 2-vane enclosed impeller prevents solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 3V series modified constant veloctiy volute case provides smooth operation over an extended portion of the performance curve for extended seal and bearing life. For use in municipal lift stations, treatment plants, and industrial waste applications.

KEY FEATURES

• Capacities to 400 gpm (25.24 lpm)
• Pressures 48 ft. of head (14.6 m)
• Solids Handling Capacity 2 1/2 in. (63.5 mm)
• Liquids Handling-- raw unscreened sewage, effluent, storm water
• Intermittent Liquid Temp up to 140°F (60°C)
• Winding INsulation Temp.(Class F) 311°F (155°C)
• Motor Electrical Data-- 1750 RPM: 1-5 HP, 230V, 1Ø, 60 Hz, 1-5 HP, 200/230/460/575V, 3Ø, 60Hz
• Std. Third Party Approvals CSA

The 3WHV and V3WHV series solids handling pumps are designed primarily for commercial applications such as schools and churches, industrial plants, shopping centers, apartments and condominiums, marinas, interstate rest stops, sewage collection systems, and much more. This pump can be installed on legs (vertical discharge) or with a quick-disconnect slide rail system. Its ability to handle 2½-inch spherical solids makes it ideal for most light to medium commercial installations.

KEY FEATURES

• Capacities to 400 gpm (25.24 lps)
• Pressures to 48 ft. of head ( 14.6 m)
• Solids Handling (dia.) 2 1/2 in (63.5 mm)
• Liquids Handling -- raw unscreened sewage, effluent, storm water
• Intermittent Liquid Temp up to 140°F (60°C)
• Motor Electrical Data ( single phase motors are capacitor start type. Myers control panels or capacitor kits are required for proper operation and warranty.) -- 1750 RPM: 1-5 HP, 230V, 1Ø, 60 Hz, 1-5 HP, 200/230/460/575V, 3Ø, 60 Hz
• Std. Third Party Approvals CSA

The 4RC and 4RCX (hazardous location) submersible wastewater pumps are the right choice when difficult to pump fibrous or stringy solids are to be expected. The 4RC/4RCX series provides smooth, vibration-free operation when operating at heads higher than peak efficiency. The pump is for use in municipal lift stations, treatment plants and industrial waste water applications.

KEY FEATURES

• Capacities To 1250 gpm (78.8 lps)
• Pressure To  265 ft. of head (80.8 m)
• Solids Handling 3 in. (76 mm)
• Liquids Handling-- raw unscreened sewage, fibrous wastewater, efluent, storm water
• Intermittent Liquid Temp. up to 140°F (up to 60°C)
• Winding Insulation Temp. 356°F ( 180°C)
• Motor Electrical Data 

-- 1150 RPM: 3–15 HP, 200/230/460/575V, 3 phase, 60 Hz 
-- 1750 RPM: 10–40 HP, 200/230/460/575V, 3 phase, 60 Hz 3450 rpm 20–60 HP, 230/460/575 volts, 3 phase, 60 Hz

• Std. Third Party Approvals FM, Class 1, Div. 1, Groups C & D (4RCX only)
• Acceptable pH Range 6 – 9Specific Gravity .9 – 1.1

The Myers 4VL submersible non-clog sewage pumps are designed especially for high flow applications such as: municipal lift stations, treatment plants, transfer stations and dewatering. A quick removal type rail system is available to simplify installation and maintenance. The 4VL’s ability to handle solids up to 3 inches in diameter makes it ideal for most high flow wastewater applications.

KEY FEATURES

• Capacities To 2100 gpm  (8000 lpm)
• Pressure To 275 ft. of head  (84 m)
• Solids Handling 3 in. (76 mm)
• Liquids Handling-- raw unscreened sewage, drain water, effluent
• Intermittent Liquid Temp. up to140ºF  (up to 60ºC)
• Winding Insulation Temp. (Class H)  356°F  (180°C)
• Available Motors-- 1750 RPM: 50, 60, 75, 100, 125 HP 460 & 575 volts 3 phase, 60 Hz
• Std. Third Party Approvals CSA
• Optional Approvals FM Class 1, Groups C & D (4VLX only)
• Acceptable pH Range 6 - 9

The Myers 12VL submersible non-clog sewage pumps are designed especially for high flow, medium head applications such as: Large municipal lift stations, treatment plants, transfer stations and dewatering. A quick removal type rail system is available to simplify installation and maintenenance. The 12VL's high pumping efficiencies, ability to handle solids up to 5 1/4 inches in diameter and 2 available motor speeds make it ideal for most high flow watewater applications.

KEY FEATURES

• Capacities To 7750 gpm (29331 lmp)
• Pressure To 72 ft. of head (21.9 m)
• Solids Handling 5 1/2 in. (133.3 mm)
• Liquids Handling-- raw, unscreened sewage, drain water, effluent
• Intermittent Liquid Temp. up to 140°F (up to 60°C)
• Winding Insulation Temp. (Class H) 356°F (180°C)

The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4" non-clog series capable of passing a full 3 3/16" spherical solid. Myers rounded port, 2 vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4VCDP series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for long seal and bearing life. For use in munipical and industrial waste applications.

KEY FEATURES

• Capacities To 1800 gpm (113.4 l/s)
• Pressure To  165 ft. of head (50.3 m)
• Solids Handling 3 3/16 in. (80 mm)
• Liquids Handling-- raw unscreened sewage, effluent, storm water
• Intermittent Liquid Temp. up to 140°F (up to 60°C)
• Winding Insulation Temp. (Class H) 365°F (180°C)
• Std. Third Party Approvals CSA(pending) 
• Optional Approvals FM Class 1, Groups C & D (pending- 4VCXDP only)
• Acceptable pH Range 6 – 9
• Specific Gravity .9 – 1.1
• Viscosity 28 – 35 SSU

The Myers 4VLDP submersible dry pit non-clog sewage pumps are designed especially for high flow applications such as: municipal stations, treament plants, transfer stations and dewatering. The ability to handle solids up to 3 inches in diameter makes it ideal for most high flow wastewater applications.

KEY FEATURES

• Capacities To  2100 gpm (8000 lmp)
• Pressure To 275 ft. of head ( 84 m)
• Solids Handling 3 in. (76 mm)
• Liquids Handling-- raw unscreened sewage, drain water, effluent
• Intermittent Liquid Temp. up to 140°F (up to 60°C)
• Winding Insulation Temp. (Class H) 365°F (180°C)
• Specific Gravity .9 – 1.1
• Viscosity 28 – 35 SSU
• Discharge, Horizontal 4 in. (101.8 mm)

The 6VCPD submersible dry pit wastewater pumps are a heavy-duty 6" non-clog series capable of passing a full 3 3/16" spherical solid. Myers rounded port, 2-vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 6VCDP series modified constant veolcity volute case provides smooth operation over an extended portion of the performance curve for long seal and bearing life. For use in municipal and industial waste applications.

KEY FEATURES

• Capacities To 2400 gpm (151.2 lps)
• Pressure To 146 ft. of head (44.5 m)
• Solids Handling 3 3/16" (80 mm)
• Liquids Handling-- raw unscreened sewage, effluent, storm water
• Intermittent Liquid Temp. up to 140°F (up to 60°C)
• Winding Insulation Temp. (Class H) 365°F (180°C)